Automotive / Fuel System Tools

OEMTOOLS® 3/8-in Drive Oxygen Sensor Socket with Side Cutaway Slot, 22-mm, 44001

Features OEMTOOLS 3/8\" Drive Oxygen Sensor Socket removes and installs oxygen sensors on all domestic and imported computerized engine controlled vehicles For use with a with a 3/8\" drive ratchet or 1\" wrench Features a cutaway slot on the side of the tool for sensor wire clearance

OEMTOOLS Combustion Leak Detector

Features OEMTOOLS Combustion Leak Detector offers a quick and efficient way to test for combustion leaks that result from head gasket, cylinder head and engine block leak Easy-to-use tool pulls air from the cooling system up through the leak tester fluid (sold separately) Tool includes a blow-moulded case for convenient storage

Equus 3640 Fuel Pressure Tester Kit w/ Adapter

Equus

Features The Innova 3640 Fuel Pressure Tester Kit features a large, easy-to-read 2½\" (6.35 cm) dial face with 0 to 100-psi scale Durable 16\" (40.6 cm) gauge hose and 6' (1.8 m) bleed-off hose with solid-brass fittings Includes Ford, GM and Chrysler test adapters and a \"Tee\" adapter for import vehicles

OEMTOOLS® Fuel & Brake Line Tubing Bender with 90-degree bend, 44179

Features OEMTOOLS Fuel and Brake Line Tubing Bender is used to make left, right, and offset bends up to 90-degrees Tool works with 1/4\", 5/16\", and 3/8\" (4, 6, and 8 mm) diameters of mild steel and soft tube material Features forged seperators with pointed edges in order to bend material easily

OEMTOOLS® Combination Tune-Up Feeler Gauge, 25-pc, 44023

Features OEMTOOLS Combination Tune-Up Feeler Gauge is the perfect tool for measuring gap widths and other vital measurements Each blade has been laser etched with SAE and metric sizes and constructed by hardened, tempered steel for durability Features a blade protected thumb notch to easily remove any of the desired blades

OEMTOOLS® Oxygen Sensor Thread Chaser, M18 x 1.5, 44255

Features OEMTOOLS Oxygen Sensor Thread Chaser is ideal for use with 3/8\" hex sockets or 3/8\" square drive Also works with M18 x 1.5 spark plug threads Thread Length: 18mm x 1.5mm

OEMTOOLS® Spark Plug Gap Gauge, 44352

Features OEMTOOLS Spark Plug Gap Gauge is perfect for measuring spark plugs gaps from 0.020 - 0.100\" (0.50 - 2.5 mm) Hole in the gauge works as an electrode adjuster Imperial sizes stamped on front, metric sizes on back

OEMTOOLS® Medium Fuel Line Hose Clamp, 1/4-in/3/4-in, 44379

Features OEMTOOLS Medium Fuel Line Hose Clamp is designed to clamp fuel injection, brake, vacuum and cooling system hoses Lightweight and non-metalic design with smooth rounded jaws to prevent hose damage Swivel head accomodates various angles

OEMTOOLS® Limited Access Thread Chaser, M14 x 1.25, 44155

Features OEMTOOLS Limited Access Thread Chaser is designed to fit spark plug holes with restricted access Narrow profile and long length of the tool allows access to spark plug holes in confined spaces For use with a 3/8\" ratchet or extension

OEMTOOLS® Spark Plug Boot Pliers with 45-degree offset jaw, 9-in, 44542

Features OEMTOOLS Spark Plug Pliers are designed to remove hard-to-reach spark plug boots The 45-degree offset jaw and vinyl grips allow for an easy hold on wires and boots Overall Length: 9\" (22.8 cm)

OEMTOOLS® Standard Ignition Spark Plug Gauge, 44226

Features OEMTOOLS Standard Ignition Spark Plug Gauge is ideal for measuring and setting spark plug gaps from 0.025\" (0.640 mm) to 0.045\" (1.140 mm) Round gauge with (6) precision wire sizes in inches and millimeters with an electrode adjuster Inch sizes are stamped on the front and metric sizes on the back

OEM Noid Light Set, 6-pc

OEM

Features OEM Noid Light Set checks electrical impulses from the wiring harness to the fuel injectors See through design lights up to check electrical pulses Includes: GM TBI, GM SCPI, GM PFI, Ford TBI, GEO TBI, Bosch PFI

OEM Ford Fuel Line Disconnect Set

OEM

Features OEM Ford Fuel Line Disconnect Set easily disconnects Ford/GM 5/16 and 3/8\" connection couplers Long reach for hard to reach places Non-sparking plastic fiberglass material

OEM Oxygen Crowfeet with Flex Handle, 22-mm

OEM

Features OEM Oxygen Crowfeet with Flex Handle is designed to remove and install oxygen sensors on most domestic and some import vehicles Features a cutaway slot to provide clearance for wiring harnesses Provides adequate depth to fit over oxygen sensors

OEMTOOLS® Distributor Clamp Wrench 1/2-in or 9/16-in bolts, 44289

Features OEMTOOLS Distributor Clamp Wrench is ideal for loosening and tightening distributor clamps with 1/2\" or 9/16\" bolts For use with 3/8\" drive tools Dimensions: 16\" long x 1/2\" wide (40.64cm x 1.27cm)

OEMTOOLS Fuel Pump Replacement Tool Kit

OEM

Features OEMTOOLS Fuel Pump Replacement Tool Kit is used for replacing the fuel pump in many Ford, GM and Chrysler fuel tanks Includes fuel line disconnects for Chrysler, Ford, and GM Complete with a soft-faced hammer for safely striking retainer rings; without causing a spark

OEMTOOLS® Scissor-Style A/C & Fuel Line Disconnect Tool, Multi Sizes, 44042

Features OEMTOOLS Scissor-Style A/C & Fuel Line Disconnect Tool is ideal for releasing spring like couplings on fuel and air conditioning lines on most Ford and Chrysler LH series vehicles Designed with a scissor-like function for easy and damage-free fuel line disconnects and coupler releases Can also be used to release locking mechanisms on all (4) sized ranges

Plastic Prop Wrench for Propeller Bolts, 1-1/16-in

Features Prop wrench specifically designed to loosen propeller bolts Made of high-impact plastic construction - will stand up to abuse Impervious to corrosion

OEMTOOLS® Noid Light Set for Fuel Injector Testing, 6-pc, 77502

Features OEMTOOLS Noid Light Set checks electrical impulses from the wiring harness to the fuel injectors Transparent design allows for electric pulse check Includes: GM TBI, GM SCPI, GM PFI, Ford TBI, GEO TBI, Bosch PFI

OEMTOOLS® Fuel Line Disconnect Tool, 5/16-in & 3/8-in, 44043

Features OEMTOOLS Fuel Line Disconnect Tool is ideal for quickly and easily disconnecting fuel line releases Designed with a scissor-like function for easy and damage-free fuel line disconnects and coupler releases Fits many 5/16\" or 3/8\" fuel line couplings found on GM, Ford, and Chrysler vehicles

OEMTOOLS® Fuel Pressure Test Kit

Features OEMTOOLS Fuel Pressure Test Kit is designed to test fuel pressure and to perform basic electrical tests The included AutoAnalyzer™ performs all standard electrical tests for on-car and bench troubleshooting Can be used to determine if a fuel pump is defective or help diagnose possible fuel-system related performance problems

OEMTOOLS® 6-point Oxygen Sensor Crowfoot Wrench, 7/8-in, 44249

Features OEMTOOLS Oxygen Sensor Crawfoot Wrench is designed for removing and installing oxygen sensors in exhaust manifolds of 1981 and later model cars and trucks For use with a 1/2\" drive ratchet 6 point design for multiple angles

OEMTOOLS® Oxygen Sensor Wrench, 22-mm

Features OEMTOOLS 22mm Oxygen Sensor Wrench makes easy work out of removing and installing hard-to-reach oxygen sensors on Ford Contours and 4.6 and 5.4 Ford modular engines used in SUVs and light trucks Features a swivel head for easy maneuverability Made of chrome vanadium steel for durability

Dorman Steel Fuel Line Repair Kit

Features Highly resistant to the extreme temperatures that lead to cracking, the Dorman Steel Fuel Line Repair Kit prevents leaks from forming Now you can replace a damaged connector without spending time or money on the entire fuel line Easy to install
Copyright © Cusmex. All rights reserved.